Blomberg CTI 30410, User Manual

Page: 13 / 44

13 / EN
Induction Hob / User Manual
4 Use of the appliance
4.1Beforethefirstuse
Clean your hob with a damp cloth, and then dry the
surface thoroughly. Do not use detergent which
risks causing blue-tinted colour on the glass sur-
face.
4.2Inductionprinciple
An induction coil is located under each heating
zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive
currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located
on the heating zone.
Of course the pan has to be adapted:
•
All ferromagnetic pans are recommended
(please verify it thanks a little magnet): cast iron
and steel pans, enamelled pans, stainless-steel
pans with ferromagnetic bottoms…
•
Are excluded: cupper, pure stainless-steel, alu-
minium, glass, wood, ceramic, stoneware,…
The induction heating zone adapts automatically
the size of the pan. With a too small diameter the
pan doesn’t work. This diameter is varying in func-
tion of the heating zone diameter.
If the pan is not adapted to the induction hob the
display will show [ U ].
4.3Sensitivetouch
Your ceramic hob is equipped with electronic con-
trols with sensitive touch keys. When your finger
presses the key, the corresponding command is
activated. This activation is validated by a control
light, a letter or a number in the display and/or a
“beep” sound.
In the case of a general use press only one key at
the same time.
4.3.1Powerselectionzone
“SLIDER”andtimersetting
zone
To select the power with the slider, slide your fin-
ger on the “SLIDER” zone. You can already have a
direct access if you put your finger directly on the
chosen level.
SLIDER
Power selection zone “SLIDER” and timer
setting zone
DIRECT ACCESS
4.4Starting-up
4.4.1Startup/switchoffthe
hob:
Action Control panel Display
To start press [ main On/Off ]
key
[ 0 ]
To stop press [ main On/Off ]
key
nothing or
[ H ]
4.4.2Startup/switchoffa
heatingzone:
Action Control panel Display
Switch on
coocking
zone
Press cooking
zone “On/Off”
key
[ ON ]
To set
(adjust the
power)
slide on the “SLIDER“
to the right or to
the left
[ 1 ] to [ P ]
To stop slide to [ 0 ] on
“SLIDER“
[ 0 ] or [ H ]
If no action is made within 20 second the electron-
ics returns in waiting position.