Operation
26
Convection Steamer Standard Controls
1
2
3
4
BCS-8G shown
5
Figure 18
CONTROLS IDENTIFICATION
1.
LOW WATER FILL LIGHT
--- during the fill
cycle, this light remains on until the water in
the steam generator is at the proper level and
up to temperature. During normal operation the
light should not be on. If the light comes on,
check the water level in the steam generator.
2.
POWER ON LIGHT
--- when lit indicates pow-
er to the unit is turned on.
3.
MODE SELECTOR SWITCH
--- turns power
to the steamer on or off.
4.
TIMER DIAL
--- used to set desired cooking
time.
5.
FLUSH/DRAIN SWITCH
--- used to flush/
drain the steam generator during decalcifica-
tion.
OPERATION
NOTE: Before the first use of the appliance, daily
or after the unit has been idle for 5 hours,
preheat with the STEAM function approxi-
mately 1-2 minutes.
1. Turn the SELECTOR SWITCH (3) to
STEAM
.
2. Set the TIMER (4) for the desired steaming
time or set it to STAY ON. The buzzer sounds
and the unit shuts off when the time has ex-
pired.
3. Move the Timer switch to the STAY ON posi-
tion to stop the buzzer and restart the unit.
4. Turn the SELECTOR SWITCH (3) to OFF to
shut down the steamer.
