Block CR-20 Manual Download Page 19

36

37

Keep the device away from heat sources! 

Ensure sufficient air circulation when 

installing in a rack!

Handle the power cable

always with caution!

Keep the device away

of moisture!

Achten Sie darauf, dass keine

Gegenstände in das Gerät fallen!

Be careful that none

Objects fall into the device!

Safety instructions

Do not let electrical appliances in children‘s hands! Never let children unattended to use electrical devices 
Also keep the Packaging foils far away from children. There is a danger of shocking and suffocation.

Safe positioning

 

▶ Use the device exclusively in dry rooms

 

▶ .If you bring the device from a cold into warm surroundings, it could be humid inside the equipment. In this 

case, wait about two to tree hours before running it.

 

▶ Place the device on a firm and horizontal plane surface.

 

▶ Place the device with at least 10 cm of distance to the wall.

 

▶ Do not cover existing ventilation openings.

 

▶ Avoid the proximity of heat sources, such as radiators, or devices with strong magnetic fields, such as 

loudspeakers.

 

▶ Do not place open sources of fire, such as burning candles, on the device.

 

▶ Do not place the device on sensitive surfaces.

Secure connection

 

▶ Connect the device only to an easily accessible and suitable installed socket. With 230 V ~ 50 Hz.

 

▶ The net plug must be of easy access so that the device can be easily and quickly disconnect from the power 

supply, in case of emergency.

 

▶ Locate the power cable so that nobody can trip over it or step on it.

 

▶ Do not use extension cables. Do not bend or squeeze the net cable.

 

▶ Always pull the mains cable from the socket.

Remove the device from the power 

if it is not used for a long time!

Make sure that the device is only 

opened by authorized persons!

Make sure that no sprays or chemi-

cals get to your device!

Make sure that your device is not 

covered!

Safe use

 

▶ Disconnect the power plug from the power socket and remove the aerial cable from the device if you do 

not use the unit for a long time or when a thunderstorm is approaching.

 

▶ The net cable shall not be wrapped around the device during operation nor in touch to hot surfaces. Avoid 

humidity to enter the housing.

 

▶ Never touch the device, the net cable or the net plug with wet hands. There is a risk of electric shock. 

Should an item or liquid get into the housing, immediately disconnect the device from the power supply 
and have it checked. 

 

▶ Have your equipment inspected by qualified personnel before restarting it. Otherwise there is the anger 

of electric shock.

 

▶ Never use the device if it is damaged, or if there is any damage to the net cable or to the plugs. In case the 

appliance is damaged, immediately pull the plug from the socket.

 

▶ Never open the device. In case of fault, please contact our service centre or any other specialized shop.

 

▶ The remote control has an infrared diode Class 1.

 

▶ Do not look at the LED with optical devices.

Summary of Contents for CR-20

































Reviews: