Page 3
Hypno™ Beam Manual Rev. A
© 2017 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Hypno™ Beam Fixture
• An Ever-So-Handy Power Cord
• A Sweet Mounting Bracket
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on purchasing the Hypno™ Beam moving head. You're all set to deliver a
stunning lighting experience of psychedelic proportions! Now that you’ve got your Hypno™
Beam, you should carefully unpack the box and check the contents to ensure that all parts
are present and in good condition. If anything looks as if it has been damaged in transit,
notify the shipper immediately and keep the packing material for inspection. Again, please
save the carton and all packing materials. If a fixture must be returned to the factory, it is
important that the fixture be returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch
.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please verify that the
fixture you receive is suitable for your local power supply. See the label on the fixture or
refer to the fixture’s specifications chart for more information. A fixture’s listed current
rating is its average current draw under normal conditions. Check the fixture or device
carefully to make sure that if a voltage selection switch exists that it is set to the correct
line voltage you will use.
Warning!
Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied does
not match the voltage indicated on the voltage selector switch. All fixtures must
be connected to circuits with a suitable Ground (Earthing).
DISCLAIMER:
The power connector fitted to the fixture and fixture cord are designed for compatibility with
products manufactured by Neutrik AG, Neutrik USA and their related entities, however they are
not manufactured by, affiliated with or endorsed by Neutrik AG, Neutrik USA, or any related entity.
Neutrik® and powerCON® are registered trademarks of Neutrik AG.
Getting A Hold Of Us
If something happens goes wrong, please visit www.blizzardlighting.com/support and
open a support ticket. We’ll be happy to help, honest.
*
The information and specifications contained in this document are subject to change
without notice. Blizzard Lighting™ assumes no responsibility or liability for any errors
or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right
to update the existing document or to create a new document to correct any errors or
omissions at any time. You can download the latest version of this document from www.
blizzardlighting.com.
Author:
Date:
Last Edited:
Date:
J. Thomas
8/9/2017
J. Thomas
8/9/2017
