Page 14
Hypno™ Beam Manual Rev. A
© 2017 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Select the Channel Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Chnd
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to highlight
14Ch
or
23Ch
.
4.) Press the
<ENTER>
to confirm, or
<MENU>
to exit.
Select the Starting DMX Address
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Addr
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose a starting DMX address ranging from
001-512, press
<ENTER>
to confirm, or
<MENU>
to exit.
Master/Slave Mode Settings
1.) Connect fixtures together via DMX.
2.) Press
<MENU>
to enter EDIT interface.
3.) Use the
<UP/DOWN>
buttons to choose
SLnd
, press
<ENTER>
.
4.) Use the
<UP/DOWN>
buttons to choose
Mast
(master) or
SL1
(slave), and
press
<ENTER>
.
Auto and Sound Active Modes:
*Important:
To use Auto or Sound Active scene modes (Shnd 1-3) in
Standalone
, the
settings in
DMX Lost
must also be set to match:
Auto
or
Soun.
Press
<MENU>
, then
navigate to
Lost,
select
Auto
or
Soun
and save. Then...
Auto Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Shnd
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose
Sh1, Sh2
or
Sh3
, press
<ENTER>
.
Sound Active Mode
1.) Press
<MENU>
to enter EDIT interface.
2.) Use the
<UP/DOWN>
buttons to choose
Shnd
, press
<ENTER>
.
3.) Use the
<UP/DOWN>
buttons to choose
Sh1, Sh2
or
Sh3
, press
<ENTER>
.
4.) For mic sensitivity, navigate the main menu to
Sens
, press
<ENTER>
.
5.) Then use the
<UP/DOWN>
buttons to choose the microphone sensitivity level
ranging from 0% to 99%, and press
<ENTER>
.