Blizzard Lighting COLORISE Infiniwhite Manual Download Page 3

Page 3

Colorise™ Infiniwhite Manual Rev. A  

 

 

© 2015 Blizzard Lighting, LLC

1. GETTING STARTED

What’s In The Box?

 

 

• 1 x Colorise™ Infiniwhite Professional LED PAR Fixture

 

• An Ever-So-Handy Power Cord

 

• This Lovely User Manual

Getting It Out Of The Box

 

Congratulations on the purchase of your new totally sweet Colorise™ Infiniwhite LED 

par fixture. She’s a real stunner alright, definitely the cat’s pajamas! Now that you’ve 

got your Colorise™ Infiniwhite (or hopefully, 

Colorises!

), you should carefully unpack 

the box and check the contents to ensure that all parts are present and in good condi

-

tion. If anything looks as if it has been damaged in transit, notify the shipper immedi

-

ately and keep the packing material for inspection.  Again, please save the carton and 

all packing materials. If a fixture must be returned to the factory, it is important that 

the fixture be returned in the original factory box and packing.

Powering Up!

 

All fixtures must be powered directly off a switched circuit and 

cannot be run off a 

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer 

channel is used solely for a 0% to 100% switch

.  

AC Voltage Switch -

 Not all fixtures have a voltage select switch, so please verify that 

the fixture you receive is suitable for your local power supply.  See the label on the 

fixture or refer to the fixture’s specifications chart for more information.  A fixture’s 

listed current rating is its average current draw under normal conditions. Check the 

fixture or device carefully to make sure that if a voltage selection switch exists that it is 

set to the correct line voltage you will use.

 

Warning! 

Verify that the voltage select switch on your unit matches the line 

voltage applied. Damage to your fixture may result if the line voltage applied 

does not match the voltage indicated on the voltage selector switch. All 

fixtures must be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call.  We’ll be happy to help, honest.

 

 

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Disclaimer:

 The information and specifications contained in this document are subject 

to change without notice. Blizzard Lighting™ assumes no responsibility or liability 

for any errors or omissions that may appear in this user manual. Blizzard Lighting™ 

reserves the right to update the existing document or to create a new document to 

correct any errors or omissions at any time. You can download the latest version of this 

document from www.blizzardlighting.com.

Author:

Date:

Last Edited:

Date:

J. Thomas

8/20/2015

J. Thomas

8/27/2015

Summary of Contents for COLORISE Infiniwhite

























Reviews: