Page 15
Colorise™ Infiniwhite Manual Rev. A
© 2015 Blizzard Lighting, LLC
Custom Programs:
Allows users to create up to 3 customizable, 20 scene programs that are directly accessible via the control
panel and also in DMX mode.
Creating A Custom Program:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
PROG,
and press
<ENTER>
.
2.) Now use the
<UP/DOWN>
buttons to highlight your choice of either
CHS1, CHS2,
or
CHS3
and press
<ENTER>
.
3.) Start with editing scene 1 (
SC01
), customizing it to your liking by using the choices outlined
in the table below. You can mix any color, and set the
duration (in seconds) before moving on to
the next scene (
TIME 0-255
). You can also add a fade in effect to the start of this scene (
WAIT
0-255
), and/or strobe (
SHUT 0-255
). Finally, if you want to use this scene in your program,
be
sure to enable it
(
USE: YES/NO
).
4.) Repeat the above process to create up to 20 scenes in each of the 3 customizable programs.
A (0-255) - Amber Intensity
SHUT (0-255) - Strobe (slow - fast)
USE (YES/NO) Use Scene in Program?
W (0-255) - Warm White Intensity
TIME (0-255) - Scene Time (seconds)
IMPORTANT:
If USE is set to NO, or TIME is set
to 0, the scene will not run!
C (0-255) - Cool White Intensity
WAIT (0-255) - Fade In (fast - slow)
Running A Custom Program:
1.) To view your newly created lighting masterpiece, use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
AUTO,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight your choice of either
CHS1, CHS2,
or
CHS3
and
press
<ENTER>
. These are also directly accessible from the
Effect
Channel
in DMX mode.
Auto and Sound Active Modes:
Set single or Master/Slaved units to run in sound active or auto mode at user selectable speeds.
Auto Mode:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to navigate to
AUTO
, and press
the
<ENTER>
button.
2.) Now use the
<UP/DOWN>
buttons to highlight any program ranging from
CHS1-CHS3,
and press
<ENTER>
.
Sound Active Mode:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
AUTO
and press
<ENTER>
,
then with the
<UP/DOWN>
buttons navigate to
SOU1
(color change)
, or SOU2
(white strobe
only), and press the
<ENTER>
button.