Page 16
Colorise™ Infiniwhite Manual Rev. A
© 2015 Blizzard Lighting, LLC
Custom Static Colors & Preset Colors:
Allows the user to create and save up to 10 custom static colors for use in standalone or DMX mode.
Custom Mixing and Preset Mixed Colors
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
STAT
and press
<ENTER>
,
then
<UP/DOWN>
buttons to select A/W/C and push
<ENTER>
to confirm your selection.
Then in the same manner, you can select
SHUT
to add s strobe effect.
Mix and Save Custom Colors (1-10)
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
CTST
and press
<ENTER>
,
then
<UP/DOWN>
buttons to select a color bank from
CT01-CT10
, and push
<ENTER>
to
confirm your selection.
2.) Now use the
<UP/DOWN>
buttons to highlight either
A
(Amber Level),
W
(Warm White
Level), or
C
(Cool White Level), then hit
<ENTER>
.
3.) Finally, using the
<UP/DOWN>
buttons, select the maximum level for each color between
000-255 (000=off), and hit
<ENTER>
to confirm your choice(s).
4.) These 10 custom colors can be accessed and edited to your liking at any time, and will be
saved even after powering off the fixture.
5.) Your custom static colors are directly accessible from the
Effect
Channel
in DMX mode.
Fixture Reset Functions:
Allows users to reset the fixture to factory default settings, without loosing customized settings, or reset
the custom programs exclusively.
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
LOAD
and press
<ENTER>
,
then use the
<UP/DOWN>
buttons to highlight
ST L
or
PR L
, and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight either
YES
or
NO
, then press
<ENTER>
.
3.) The
ST L
reset function will reset all default values
with the exception of
those in
ADDR
(address),
CTST
(10 custom colors), and
PROG
(custom scenes and programs).
4.) The
PR L
reset function will only reset all customized program settings found in the
PROG
settings (custom scenes and programs).
Data Sync Feature:
Users can transfer their custom settings from one fixture to another via DMX.
1.) Disconnect fixtures from any DMX controllers, and link them together via DMX in/out.
2.) On the sending fixture (DMX out), navigate the main menu using the
<UP/DOWN>
buttons
to reach
SEND
, and press the
<ENTER>
button.
3.) Select
YES
, and press the
<ENTER>
button to begin the transfer.
4.) Information for
ADDR
(address) will not be sent.
5.) After the data has been transferred, the receiving fixture will be automatically be reset.