2
OM0001_L2_R_WM_USAv2.1
g.
WARNING:
RISK OF ELECTRIC SHOCK
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product
– if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
h.
MODEL WE-30K GROUNDING INSTRUCTIONS:
(Permanently connected models)
This product must be connected to a grounded, metal, permanent wiring system; or an
equipment-grounding conductor must be run with the circuit conductors and connected
to the equipment grounding terminal or lead on the product.
WARNING:
RISK OF ELECTRIC SHOCK
Do not touch live electrical parts.
Verify that the system is properly installed and grounded according to its installation
manual and national, state, and local codes.
Incorrect connections may cause electric shock
Disconnect input power before installing or servicing the equipment.
WARNING: Models WE-30C
– Indoor use only
Cord-connected models of this equipment are intended for indoor use only. These models
can be converted for permanent connection for outdoor use. See the
Level 2 Wall Mount
Installation Manual
for details.
WARNING:
No user-serviceable parts inside
If any component part is found to be damaged and/or in need of service, have all such
service performed by a certified electrical contractor or qualified Blink charger service
facility.
CAUTION:
This Blink E
VSE’s factory default current setting is 30 amps. If the device is
connected to a lower current setting, a qualified Blink technician or licensed contractor must
adjust the device settings and reset the unit before use.
