20
Charge on.
SITUATION
ACTION
Status indicator is in solid red
1. There is a critical error (CCID trip or Relay failure)
2. Unplug the charging connector
3. Turn the Blink HQ charger power OFF then back ON
4. If the situation persists, contact Customer support
Cannot set delay timer
1. Delay timer can only be set when the charger is in Standby state
and the status indicator is solid green
2. Once the charger is in Charging state (and the status indicator is
in blinking green), the delay timer button is disabled
3. Stop the ongoing charging session by pressing the STOP button
4. Unplug the charging connector
5. Wait until the status indicator turns solid green
6. Press Delay timer button to set delay timer
7. Connect charger to the EV
8. Delay timer will start to count down
4.5 General Care
The exterior of the Charger is designed to be rainproof. To ensure proper maintenance of the
charger, follow these guidelines:
• Despite the water resistance of the enclosure, when cleaning it is preferred to not direct streams of water at
the unit. Clean with a soft, damp cloth.
• Make sure the charging plug is put back in the holster after charging to avoid damage.
• Ensure the power cable is stored on the cable hanger after use to avoid damage.
• If the power cable or the charging plug is damaged contact Customer Support..
