•
Selecting the timer will show "Activate" and "Set time" options.
•
"Activate" will start the countdown with a currently set time.
•
Selecting "Set time" will produce a menu to set minutes and seconds of the
countdown.
•
After minutes and seconds are input, the "Save" menu item will store the
information to the timer.
Activating, pausing, and canceling the countdown
•
To activate the timer select the timer and "Activate" menu item afterward.
The timer will start counting down.
•
While the timer is counting down, you can either pause it (the timer will freeze
on its current time) or cancel it (the timer will reset to its initial time).
•
While the timer is paused, you can either resume it (the timer will continue
counting down from its current time) or cancel it (the timer will reset to its
initial time).
Stopwatch
Stopwatch allows you to measure elapsed time from the moment the stopwatch is
started. The stopwatch runs in the background, allowing you to use other
applications in the meantime.
Operating the stopwatch
Long pressing the screen while the stopwatch is running will always stop (pause) it.
While the stopwatch is not running you can access a menu with the following
actions:
•
Resume or Start stopwatch - start the stopwatch from the time that was
stopped earlier.
•
Restart stopwatch - zero the stopwatch and instantly start a new one.
•
Zero stopwatch - reset the stopwatch.
Calendar
The Calendar application allows you to create and track your agenda. You can
create events lasting the whole day, events lasting from specific time to specific
time, or event stretched over several days. You can be notified about an upcoming
event in advance and each event can be repeated with a specified interval.
Adding an event
Selecting the add new event menu item will open a menu where details of the event
can be specified. The only mandatory fields are title and start date. Following fields
can be filled during the event creation:
•
Title - title of the event.
•
Location - location of the event. You can use this field to add more information
as well.
•
Start date - the first day of the event. You can either enter the date manually
via enter a date option or use the pick a date option, which will show you 7
days of the upcoming week.
•
Start time - if the event is meant to last the whole day, leave this empty.
Otherwise, enter the starting time of the event.
•
End date - in case of a one-day event the end date should be the same as the
start date. Otherwise, enter the last day of the event.
•
End time - enter the end time of the event. If you enter earlier time than the
start time, the start time will be set to one hour before the end time.
