Blaze BLZ-2PRO Use & Care Manual Download Page 9

Page: 9 / 40

Blaze Outdoor Products Instructional Book

Page | 9

When using your Blaze appliance, please read and follow these basic precautions:

To reduce the risk of fire, electric shock, or injury, read and follow these basic precautions before installing/operating your

appliance.

WARNING:

Improper installation, adjustment, alteration, service or maintenance can cause injury or property

damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing

this equipment.

EXPLOSION HAZARD

Do not use the appliance as storage area for flammable materials. Keep area clear and free from combustible

materials, gasoline, and other flammable vapors and liquids. Failure to do so can result in death, explosion, or fire.

APPLIANCE INSTALLATION

This gas appliance must be installed in accordance with all local codes.

If installation is planned in an area with no local codes, the gas appliance must be installed in accord with the

National Fuel Gas Code ANSI Z223.1 and storage and handling of liquefied petroleum gases, ANSI/NFPA 58 or

CSA B149.1 natural gas and propane installation code.

CALIFORNIA PROPOSITION 65 WARNING

WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds), which are

known to the State of California to cause cancer and birth defects or other reproductive harm. For more information

go to: www.P65Warnings.ca.gov

Summary of Contents for BLZ-2PRO









































Search results

Summary of Contents for BLZ-2PRO

Reviews:

Related manuals for BLZ-2PRO

Brands by name

Popular brands

Blaze BLZ-2PRO, Use & Care Manual

Search results

Summary of Contents for BLZ-2PRO

Reviews:

Related manuals for BLZ-2PRO

Brands by name

Popular brands