Blaze King CALDERA, Users Installation Operation & Maintenance Manual

Page: 48 / 53

THE CALDERA
Page 48
FAN KIT REMOVAL & INSTALLATION
Before removing the fan be sure to let unit cool to room temperature, disconnect electrical power
to the unit, shut off gas to the unit and disconnect the gas line to the appliance.
To remove fan, for maintenance or replacement:
1) Remove the louvers and door.
2) Remove the logs, brick panels and burner.
Note: Be careful when handling these items as they
may break if dropped or handled roughly.
3) Remove fan guard (figure 24) and valve tray.
4) Disconnect wires, be sure to label wires prior to disconnecting to ensure they are replaced in the
correct location.
5) Remove the four screws (Figure 22) and take fan out.
6) Installation is the reverse order of the previous steps
See next page for continued installation instructions.
Figure 22
Figure 23