Blaze King CALDERA, Users Installation Operation & Maintenance Manual

Page: 47 / 53

THE CALDERA
Page 47
TOP/REAR VENT CONVERSION
The appliance is easily converted from top vent to rear
vent.
The steps for converting are as follows:
1.
Remove the outer shell cover plate (# 1).
2. Remove the heat shield cover plate (# 2).
3. Remove the air intake assembly (# 3).
4. Remove the exhaust assembly (# 4).
5. Rotate the exhaust (# 4) and air intake (# 3) assem-
blies into the rear vent position and re-install.
6. Rotate the heat shield cover plate (# 2) and re-install.
7. Insert the round blanket cutout into hole on top.
8. Rotate the flue collar plate (# 1) and re-install.
1
2
3
4
1
2 3 4
Figure 21
Figure 20
Note : When converting from rear to
top vent , make sure heat shield (#5)
is installed (see page 9)
5