34
The following indications are used to inform you that there is a problem with the connections of the system.
BUS-E50:
Two or more Radio/CD-Changer are connected.
BUS-W08:
Two or more monitors are connected to the BUS terminal.
The following messages are displayed when certain problems are occuring in your system. Take the recom-
mended actions.
EJECT
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
➪
Load the disc magazine properly.
No CD In the unit.
➪
Insert the CD.
NO DISC
No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
E-04
No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
➪
Clean the CD and load it correctly.
E-99
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
➪
Check the disc magazine. And then press the reset button on the unit.
If the “E- 99” code does not disappear, consult your nearest service center.
HOLD
The protective circuit in the unit activates when the temperature inside the automatic disc changer
exceeds 60ºC ( 140ºF), stopping all operation.
➪
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature
falls below 60
°
C (140
°
F), the disc will start playing again.
Troubleshooting Guide
