32
Installation for Antenna Unit
•
Attach the antenna to the inner glass surface of the
rear window using double-sided tape. Carefully
check the installation location as the tape can only
be stuck on once.
•
A cold window glass surface will weaken the adhe-
sive strength of the double-sided tape.
Also if installation inside the cabin is performed on
a day with high humidity or when it is raining, the
high humidity level will weaken the adhesive
strength of the double-sided tape.
•
Do not install the antenna in a location where it
may obstruct the field of view during driving, such
as on the windshield.
1
Check the location where the antenna is to be atta-
ched. Clean off any grease or dirt from the installa-
tion location using the supplied glass cleaner, cle-
an the area with water and allow to dry.
Caution!
Clean the glass thoroughly as failure to clean the glass
can not only weaken the adhesive strength of the
double-sided tape, but may also cause it to come loo-
se.
2
Remove the protective strips from the antenna
parts and the back of the antenna unit.
3
Attach the double-sided tape of the antenna pans
and the antenna unit to the rear windshield glass.
Attach the double-sided tape by firmly pressing
down from the top. Secure cables using the supp-
lied clamps.
Installation
4
After attaching the antenna with the double-sided
tape, allow it to sit undisturbed for 24 hours. Take
care not to apply force to the antenna or allow it to
get wet during this time.
5
Wire the antenna cable to the hideaway unit.
CAR DIVERSITY ANTENNA
WITH BOOSTER
ON
OFF
BOOST
–
+
Antenna unit
Antenna parts
Accessory
8
Rear seat
Bundle cables
with the clamper
bar
Rear Window
Fuse (1A)
ACC
Ignition key switch
Battery
Car fuse box
(Main fuse)
Ground cable (Black) to car chassis
Ignition cable (Red)
To the monitor unit
Connection and Install Antenna Units
Connection of Antenna Unit
Booster switch
Se this booster switch to
“OFF” if there is ghosting
of the on-screen image
due to electromagnetic
fields.
Caution!
Incar antennas have a lower reception
sensitivity intended for outside mounting.
The picture may not appear or may distur-
bed if the signal in your area is weak.
OFF
ON
