20
Traffic Information Function
You can listen to traffic information. If you are listening
to discs, they will continue playing until a traffic bulletin
is broadcast.
Turning Tl function On/Off:
Touch [ Tl ] on the control screen to turn the function
on and off.
When the function is on, the Tl indicator is turned on.
When a traffic information station is received, the Tl
indicator blinks. If you are listening to a disc when a
traffic bulletin begins, playback will be interrupted.
When the bulletin ends or poor reception causes signal
losses, the disc will continue to play again.
Switching to a Different Traffic Information Station:
Use [
] / [
] to make an auto seek of the Tl
stations in a certain band.
Note
•
When you are listening to a disc, you cannot chan-
ge to another Tl station.
•
When the auto TP seek function is turned on and
reception starts to weaken, the tuner automatically
seeks stations with better reception.
•
If you are tuned to a station that is not a traffic in-
formation station itself but which provides EON
services, you can still have traffic information recei-
ved.
Presetting the Volume for Traffic Informa-
tion
News Preset the volume to be used when traffic infor-
mation/news starts to be broadcast.
1
Tune into the station for which you want to set the
volume.
2
Adjust the volume to the desired level.
3
Keep touching [ Tl VOL ] for two seconds or more.
The volume level that the data has been stored.
Future traffic information broadcasts are heard at the
preset level.
Note
•
The volume cannot be lowered by this function du-
ring tuner reception. The volume is only set when it
is louder than the listening volume of the tuner.
•
You can arrange only to listen to traffic information /
news bulletins with at preset volume with the volu-
me set at minimum.
FM/AM Tuner Control Function
