34
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
Switching the car audio system on/
off with the ignition
If the car audio system has been con-
nected to your vehicle ignition, it is pos-
sible to switch it on and off with the igni-
tion.
You can also switch the car audio sys-
tem on when the ignition is switched off.
➮
Press down and hold
3
until the
car audio system switches on.
Note:
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
Switching the car audio system on/
off with the removable front panel
➮
Remove the release panel.
The car audio system will switch off.
➮
Replace the release panel.
The car audio system will switch on
again. The last settings used (radio, tape
deck or CD changer) will be activated.
Switching the car audio system on/
off by pressing
3
➮
Press
3
to switch the car audio
system on.
➮
Press
3
for longer than 2 seconds
to switch the car audio system off
again.
The system will then switch off.
Switching the car audio system on
by inserting a cassette tape
If the system is switched off and there
is no cassette in the tape deck,
➮
press
9
.
The flip release panel will open.
➮
Insert the cassette into the tape
deck with the open side facing to-
wards the right until you feel resist-
ance. Do not use force.
The cassette will be pulled automatically
into the tape deck.
Do not attempt to assist or prevent this
process.
➮
Press the operating panel closed
gently until you feel it click into
place.
The audio system will switch on. Tape
playback will begin.
SCHWITCHING ON/OFF
