44
Scanning all of the cassette
tracks (SCAN)
➮
Press OK
;
for longer than two
seconds.
“CAS SCAN” will appear in the display.
Scanning will begin with the next track
in ascending order.
➮
To stop the SCAN function, press
OK
;
again.
The track currently scanned will contin-
ue playing.
Notes:
●
It is possible to adjust the scan
time. For more information, read
the section on “Adjusting the scan
time” in the chapter on “Radio Op-
eration”.
●
To be able to use the S-CPS, RPT
and SCAN functions, there has to
be a blank space of at least three
seconds between the tracks on the
cassette.
Switching the display mode
➮
To switch the display between the
tape side, counter, elapsed playing
time, remaining playing time and
the clock, press / DIS
7
for
longer than two seconds once or
repeatedly as required, until the de-
sired information appears in the
display.
Resetting the counter
To reset the counter,
➮
press 5 MIX
>
.
Fast forward/rewind
Fast forward
➮
Press
:
.
“FORWARD” will appear in the display.
Fast rewind
➮
Press
:
.
“REWIND” will appear in the display.
Stopping fast forward/rewind
➮
Press OK
;
.
Playback will resume normally.
Note:
During fast forward/rewind, it is also
possible to listen to the last radio sta-
tion you tuned into. Switch on “Radio
monitor”.
Interrupting playback (Pause)
➮
To interrupt cassette playback,
press 3
>
.
Playback will be interrupted, “CAS
PAUSE” will appear in the display.
➮
Press 3
>
again to end the
pause.
Switching Radio monitor on/off
➮
Press MENU
8
.
➮
Press
:
repeatedly until “RM
ON” or “RM OFF” appears in the
display.
➮
Press or
:
to switch Radio
monitor on or off.
➮
Press MENU
8
or OK
;
.
TAPE DECK OPERATION
