38
G
LD
Loudness - When listening at a low
level, the Loudness function creates a
more natural sound by boosting the
low frequency range.
LD on/off: Press the button.
When the Loudness function is active,
“LD” will light up in the display.
See chapter “DSC programming” for
more information.
H
DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings
to suit your personal needs and prefer-
ences. See chapter “DSC program-
ming” for more information.
I
GEO
To adjust the balance (left/right) and
fader (front/rear) with the rocker
switch.
Fader front
Fader rear
Balance left
Balance right
The last setting will be stored automat-
ically.
To switch off GEO: Press button once
again.
If the setting remains unchanged
within four seconds, the display will
switch back to the previous condition.
Extra function GEO
Separate balance and fader settings
for traffic messages. See chapter “Ad-
justing GEO for traffic messages and
the warning beep”.
J
AUD
To adjust the treble and bass frequen-
cies with the rocker switch.
Treble –
Bass –
Bass +
The last setting will be stored automat-
ically.
To switch off AUD: Press button once
again.
If the setting remains unchanged within
four seconds, the AUD setting will be
terminated automatically.
You can distribute the bass and treble
level separately among the front and
rear speakers.
For more information see “Program-
ming with DSC, BAS/TRE”.
Köln RCM126 gb
13.06.2002, 11:18 Uhr
38
