background image

BT 10e

Important Safety Instructions

Important Safety Instructions

Caution:

To reduce the risk of electric shock, do not dismantle the product and do not expose the 
apparatus  to  rain  or  moisture.  No  user-serviceable  parts  inside.  Refer  servicing  to 
qualified personnel only.

Explanation of Graphical Symbols:

To achieve the utmost in enjoyment and performance, and in order to become familiar with its 
features, please read this manual carefully before attempting to operate this product. This will 
assure you years of trouble free performance and listening pleasure.

Important Notes

Ÿ

This safety and operating instruction should be retained for future reference.

Ÿ

The  apparatus  should  not  be  exposed  to  dripping  or  splashing  or  placed  in  a  humid 

atmosphere such sa a bathroom.

¡

Do not install the product in the following areas:

¡

Places exposed to direct sunlight or close to radiators.

¡

On top of other stereo equipment that radiate too much heat.

¡

Blocking ventilation or in a dusty area.

¡

Areas where there is constant vibration.

¡

Humid or moist places.

Ÿ

Do not place near candles or other naked flames.

Ÿ

Operate the product only as instructed in this manual.

Ÿ

Before  turning  on  the  power  for  the  first  time,  make  sure  the  power  adaptor  is  properly 

connected.

For  safety  reasons,  do  not  remove  any  covers  or  attempt  to  gain  access  to  the  inside  of  the 
product. Refer any servicing to qualified personnel.
Do  not  attempt  to  remove  any  screws,  or  open  the  casing  of  the  unit;  there  are  no  user 
serviceable parts inside. Refer all servicing to qualified service personnel.

The lightning flash within an equilateral triangle is intended to alert you to the 
presence of uninsulated dangerous voltage within the product's enclosure that 
may  be  of  sufficient  magnitude  to  constitute  an  electric  shock  to  a  person  or 
persons.

The exclamation point within an equilateral triangle is intended to alert you to 
the  presence  of  important  operating  and  maintenance  (servicing)  instructions 
in the literature accompanying the product.

22

Summary of Contents for BT 10e



































Reviews: