Blaupunkt BT 10e, Instruction Manual

Page: 32 / 34

Please perform an initial charge of 4 hours prior to initial
use.
Specifications
Amplifier
Total Power: 4 Watt RMS
Power distribution: 1.25 Watt x 2 + 1.5 Watt
Harmonic distortion: < 5% 1 W 1 kHz
Frequency response: 40 Hz - 18 kHz
Signal/Noise ratio: > 65 dB
Separation: > 45 dB
Speakers
Tweeter type: 2” x 2
Tweeter rated power: 2 Watt 4 Ohm
Woofer type: 3”
Woofer rated power: 5 Watt 2 Ohm
Interfaces
Output: NIL
Input: 3.5mm stereo jack, mini-USB charging port
Wireless: Bluetooth 2.1 + EDR, and A2DP
Power consumption (on mode): 5 Watt
Power consumption (stand-by mode): <0,5 Watt
Troubleshooting
LED do not light up
No Sound
Intermittent sound
How to charge the system?
What are the products supported?
Sound is distorted
Where to place this speaker
Check if the system is powered on or battery is replaced
with fresh BL-5C type
Ensure volume is correctly set
Check if the audio source is properly paired and
connected. Secondly check if the 3.5mm stereo
plug is correctly inserted for MP3 Link mode.
Please check the audio source distance, try to place
it nearer to the speaker system.
Simply connect the system to the supplied Charging
adapter. After charged the LED will turned off.
Any Bluetooth enabled music devices and playback
devices such as PC, Media players with 3.5mm
stereo plug.
Check if the volume is at lower level and the Mp3
format is recorded at above 196 bitrate
It is magnetically shielded so can be placed
near LCD TV Monitor without any distortion
If the problem still exists, please contact the distributor or ask for professional service
BT 10e
32