Blaupunkt BT 10e, Instruction Manual

Page: 31 / 34

4. Bluetooth playback
Once connected, you can commence the music playback either on the mobile phone, tablet or
notebook, etc. The sound will be transferred wirelessly to the Blaupunkt BT 10e system directly.
During streaming, the LED will blink, once for 2 seconds duration in 5 seconds intervals.
Depress the + or - buttons for volume adjustments. The LED will illuminate in green steadily
once depress.
To mute the playback, depress the Mute button and the LED will illuminate in green constantly
till it is depress again to deactivate.
5. MP3 Link mode
Connect the 3.5 mm stereo source to the MP3 Link jack. This will immediately disconnect the
Bluetooth mode if it is on. Commence your media player via the 3.5 mm stereo connection.
6. Battery charging (Lithium battery type: BL-5C)
1. Connect the charging adapter to mini-USB port of the speaker . Ensure the speaker system is
turned off for charge. The system will commence its auto charging mode. The LED will
illuminate in bright red colour. Once fully-charged, it will be turn dim red. Please initial charge
the system for 4 hours prior to first.
2. The speaker can charge the battery at same time when you play the music and connect the
power adaptor. It is better to turn off the unit for full charging, and reduce the battery power
consumption.
Note :
1. Please use the specified charger for charging/recharging the battery. Please do not short-
circuit.
2. It is prohibited to dispose batteries into household waste. Please follow the local legislation
for battery disposal.
3. The batteries should not be exposed or disposed into fire or excessive heat. Heavy damage is
not allowed. Otherwise, the batteries may explode.
4. Before initial usage please charge the battery more than 8 hours. The battery capacity may be
affected after 500 times charging.
BT 10e
31