39
Appendix
CD-ROM
The data required for route guidance are stored digitally on the CD-ROM.
For details on the exact contents of the CD, please refer to the information
accompanying it.
Changing the CD
The CD-ROM can only be changed whilst the vehicle is stationary. The
system must be switched on. To eject a CD-ROM, slide the locking lever to
the left. The CD-ROM will then be ejected. While the CD is being ejected,
the locking lever must not be slid back to the right. Carefully insert the new
navigation CD-ROM – with its label facing uppermost – as far into the CD
slot as necessary until the CD-ROM player begins to draw the CD in by
itself. After the CD has been drawn in completely, slide the locking lever
back to the right again.
Note:
After changing the CD, the system will, if necessary, automatically reload
the language. Loading the language usually takes approx. 30 seconds.
CD slot
locking lever
