32
S
STANDBY TIME
-TIME TIME+
0
MINUTES
SET EXIT
STANDBY
When you switch off your vehicle’s ignition,
you also switch off the TravelPilot. When
the system is switched back on, you must
re-activate route guidance. To put route
guidance on standby, you can enter a
standby time. During this standby time, the
route guidance in progress will remain
stored. When your vehicle is re-started,
route guidance will resume functioning im-
mediately and continue automatically as if
it hadn’t been interrupted.
Select the standby time by pressing
-TIME
and
TIME+
and set it.
The standby time can be set to a maxi-
mum of 30 minutes!
DEMO
Simulates route guidance from start to
finish. There are two options available.
If you select
ON
, you can use all of the in-
put functions in the navigation menu. Press
START NAVIGATION
to start the
demonstration (simulates driving from your
starting point to your destination). It will run
through once.
If you select
CONTINUOUS
, the simulation
from start to finish will repeat continuously.
Press
OFF
to end the demo and restart
navigation.
S
DSC NAVIGATION
GPS INFO DEMO
POSITION
NAV LANGUAGE
STANDBY VER
EXIT
S
DEMO MODE
ON
CONTINUOUS
OFF
EXIT
