6
CAUTION:
* If the length of the power cord restricts robots movement, a robot Extension Cord can be used. Disconnect end A
and end B, and connect them with both ends of the Extension Cord respectively and tight.
* Only one Extension Cord can be used for the robot.
3.5 Place the Safety Pod
Wipe the surface of the Safety Pod’s suction cup clean with the provided Finishing Cloth.
3.6 Spray Cleaning Solution
CAUTION:
* The robot is recommend to be used with XWIN Cleaning Solution. Using other cleaners may reduce robots
performance.
* Spray the upper and lower sides of the Cleaning Pad with the provided XWIN cleaning Solution. After
spraying, wipe the bottom of the robot with a dry cloth.
B
A
1
Loop one end of the
Safety Tether to end A
on the robot Power
Cord and tight.
2
Connect end A and end B and tight.
3
Loop the other end of the Safety Tether
around the Safety Pods channel and
pull it tight.
If the robot is being used to clean an inside window:
Press the Safety Pod FIRMLY on the top corner of the inside
window. Make sure the Safety Pod is attached securely in place.
If the robot is being used to clean an outside window:
Press the Safety Pod FIRMLY on the inside of the window being
cleaned. Make sure the Safety Pod is attached and securely in place.
3. Operating XWIN
