background image

S30, S31, S32

2

www.blaubergventilatoren.de

CONTENTS

Safety requirements ..................................................................................................................................................................... 3
Purpose  ............................................................................................................................................................................................... 4
Technical data ................................................................................................................................................................................. 5
Installation and set-up................................................................................................................................................................ 6
Control  ................................................................................................................................................................................................ 10

This user’s manual is a main operating document intended for technical, maintenance, and operating staff.
The manual contains information about purpose, technical details, operating principle, design, and installation of the S30, S31, S32 unit 
and all its modifications.
Technical and maintenance staff must have theoretical and practical training in the field of ventilation systems and should be able to 
perform works in accordance with workplace safety rules as well as construction norms and standards applicable in the territory of the 
country.
The information in this user’s manual is correct at the time of the document’s preparation.  
The Company reserves the right to modify the technical characteristics, design, or configuration of its products at any time in order to 
incorporate the latest technological developments.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any information 
search system or translated into any language in any form without the prior written permission of the Company.

Summary of Contents for S30





















Reviews: