www.blaubergventilatoren.de
S30, S31, S32
15
5. Main temperature control (air temperature in the supply air duct).
6. Set indoor air or supply duct temperature point (depending on settings).
7. Indicates access to the user menu with UP, DOWN and ENTER buttons.
INFO: indicates general condition of devices, operation status of outputs and inputs of devices and sensors.
SET:
indicates current set point and operation mode according to schedule. It is possible to set the set points
for devices and schedule.
MODE: indicates changing of operation mode (stop, economy, precomfort, comfort, auto, in mask X00a).
8. Supply fan speed.
9. Extract fan is on.
10. Extract fan speed.
Set-up of scheduled mode.
Press ENTER to switch to menu in the SET mode.
The menu has three set points:
1) Setup of operation mode for each week day. It is possible to set maximum four time bands for one day (from Monday till Sunday)
and start time for set mode.
1
4
2
3
1: Selection of week day for setup.
2: Copying of set parameters to enter for the other week day. Select Yes to copy parameters on the next day (parameter Copy to).
3: Setting number of time bands for the day. Current mode exits as the next mode starts.
4: Saving set parameters.
2) Setting operation mode for 3 time bands (from one day till one year).
Current operation mode exits as the next mode starts.
3) It is possible to set a day for switching to set mode.
It is possible to set maximum 6 days. Current operation mode exits as the next mode starts.
To activate the schedule mode set the value I007 for the BOARD parameter in the section Unit cfq.
