background image

25

www.blaubergventilatoren.de

KOMFORT EC DE

4. Remove the nine screws that retain the heat exchanger and remove the 

heat exchanger from the unit. Remove the heat exchanger with care.

3. Fan maintenance (once per year).

The regular filter cleaning may not completely prevent the dust ingress 

into the unit, which results in the unit capacity decrease. 

Clean the fan with a soft cloth or a brush. Cleaning with water, abrasive 

detergents, sharp object or chemicals is not allowed. 

Access to the unit fans in 

KOMFORT EC DE400-1.5 ... EC DE1100-3.3

:

1. Remove the bottom panel. 
2. Disconnect the drain hoses and take off the drain pan. 
3. Remove the screws and take off the intake diffusers.

Installation place of the four

fixing screws of the electric motor 

Socket connector

Drain pan

Diffusers

4. Remove the fixing screws of the motor fixing bracket.

5. Shift the motor deeper into the unit through the fan intake opening and 

disconnect the socket connector. 

6. Turn the motor as shown in the figure and then remove it from the unit. 

Installation place of the four

fixing screws of the electric motor 

Socket connector

Drain pan

Diffusers

4. Condensate drain system maintenance (once per year).

Extract air particles may accumulate in the condensate drain system and 

cause its clogging. Pour a drain pan under the unit with water to check free 

water flow. Clean a U-trap and the drain system if required.

5. Supply grille maintenance (twice per year).

Check the supply grille and remove foreign objects to maintain free air 

intake.

6. Air ducts maintenance (once in 5 years).

The regular unit maintenance in compliance with the above rules may 

not completely prevent dust ingress into the air ducts which may result in air 

flow decrease. The air duct maintenance involves their periodical cleaning or 

replacement.

7. Exhaust and intake diffuser maintenance (as required). 

Remove the exhaust and the intake diffuser and flush those with warm 

detergent solution. Check the ductworks connections periodically.

KOMFORT_EC_DE v1(1)_EN.indd   25

07.08.2015   12:40:24

Summary of Contents for KOMFORT EC DE Series





























Reviews: