www.blaubergventilatoren.de
vento expert a50c3-1 S8 W v.2
18
DATE AND TIME SETUP
WEEKLY SCHEDULE SETUP
FILTER TIMER RESET
RESTORE FACTORY DEFAULT SETTINGS
To apply the selected settings for the selected day of the week, press the
Apply
button.
For weekly schedule proper operation make sure to set the correct date and time.
The ventilator filters must be serviced after every 90 hours of continuous operation. The need to replace
the filters is signalled by the indicator
in the upper section of the
Control
menu. Replace the filter
and reset the filter timer.
To reset the filter timer via the mobile app, go to
Menu -> Settings -> Filter
. Then press the
Reset filter
timer
button.
The 90 days are counted on the master ventilator only. The filter replacement indication is replicated on all
the Slave units. If so, replace the filters on all the ventilators on the network. Upon filter timer reset the filter
replacement warning is disabled on all the connected ventilators.
The filter timer can also be reset by means of the button on the indoor unit (see page 14).
To restore the factory settings via the mobile app, go to
Menu -> Settings -> Factory settings
. Then
press the
Reset to factory settings
button.
WARNING!
Resetting the factory settings may result in losing Wi-Fi connection with the device.
The unit operates in two modes:
Master
The unit acts as a leading unit in the network. All the Slave units and mobile devices are connected to the
To set up the weekly schedule in the mobile app, go to
Menu -> Settings -> Schedule
.
The weekly schedule can be set by means of 4 time intervals available for each day of the week.
You can select one of the three fan speeds or
Standby
mode for each time interval.
To get the current settings for the selected day of the week, press the
Receive
button.
