www.blaubergventilatoren.de
vento expert a50c3-1 S8 W v.2
14
REMOTE CONTROL OF THE VENTILATION UNIT
ON/Standby. The Standby mode depends on the position of the DIP switch 2 (see page 12). The same button is
used to reset alarms (Alarm) and turn off the timers.
Ventilator speed selection: Speed III-II-I respectively.
Regeneration mode
The rotation direction of both fans changes to opposite every 70 seconds. Heat recovery is performed in this
mode. The fan rotation direction depends on the position of the DIP switch 3.
Ventilation mode
The ventilator operates in permanent air supply or air extraction mode at set speed. The fan rotation direction
depends on the position of the DIP switch 3.
Timer control buttons:
Party mode:
the timer activates operation of the unit at Speed III for a set time period, 4 hours by default. The
timer setting may be changed during setup of the unit on mobile device.
Night mode:
the timer activates operation of the ventilation unit at Speed I for a set time period, 8 hours by
default. The timer setting may be changed during setup of the unit on mobile device.
The ventilation unit reverts to operation with a previous speed setting upon elapse of the set time period.
Press any speed setting key to deactivate the timer or press the timer control button once again.
