background image

 

INTRODUCTION 

 
Minimotard 2,5 is intended for a drive on closed tracks with even, smooth, and 
dust-free surface. Both growns - up and children can ride on the Minimotard. 
Children only under the supervision of a grown - up and responsible person. If 
the terms of a track are fulfilled, the Minimotards can be used for races. 
Minimotard is equipped with a single - cylinder, two - stroke, petrol 
combustion engine, with a front and rear disc brake, the rear one being 
controlled by a lever on the left side of handlebars and the front one by a lever 
on the right side of handlebars, when seeing in the ride direction. The fuel 
quantity controlled by a handle on the right side of handlebars. The engine is 
fitted with an air filter and an exhaust silencer. The driving moment 
transmission from engine to the driven rear wheel is carried out by a chain 
drive the ratio of which can be changed to a small extend by a sprocket wheel 
exchange on the rear wheel. 

 

BASIC TECHNICAL DATA 

 
ENGINE: 

TWO - STROKE ...............................................................AIR COOLED 

 DISPLACEMENT..................................................................... 39,9 ccm 
 POWER 

OUTPUT.................................................. 2,5 kW at 8 700 rpm 

 TORGUE 

..............................................................3,5 Nm at 6 000 rpm 

 CARBURETOR 

.................................................................DELL’ORTO 

 IGNITION......................................................................... ELECTRONIC 
 STARTING ..............................................................................MANUAL 
 CLUTCH .....................................................CENTRIFUGAL, FRICTION 
FRAME: WELDED ........................................ HIGH-STRENGTH STEEL TUBES 
LINING: ........................................................................................ TWO PARTED 
BRAKES: FRONT 

WHEEL.....................................MECHANICAL DISC BRAKES 

 REAR 

WHEEL.......................................MECHANICAL DISC BRAKES 

WHEELS: FRONT 

WHEEL.....................................LIGHT ALLOY 2,1“ x 6,5“ - 90 

 REAR 

WHEEL.................................... LIGHT ALLOY 2,1“ x 6,5“ - 130 

TIRES: FRONT ...................................................90/65 – 6,5“  WITH PATTERN 
 REAR.....................................................110/55 – 6,5” WITH PATTERN 
FUEL: 

MIXTURE OF PETROL 91 OR HIGHER OCTANE  + 2-STROKE  

 SYNTHETIC 

OIL 

 MIXING 

RATIO.............................................................................. 50 : 1 

 TANK 

CAPACITY......................................................................1 LITRE 

MAX. SPEED (depends on mounted sproket wheel):..... up to 28 mph ( 45 km/ h) 
UNLOADED WEIGHT..........................................................................39,7 lb ( 18 kg) 
CARRYING CAPACITY.....................................................................242 lb ( 110 kg ) 
BASIC DIMENSIONS: 
 LENGHT ....................................................................................925 mm 
 WIDTH ...................................................................................... 580 mm 
 HEIGHT .................................................................................... 570 mm 

 
 

Summary of Contents for minimocard 2.6

















Reviews: