Grinding & Polishing
MODEL BGS-250-115-S GRINDER
SECTION 7
MAINTENANCE
45
OPERATING MANUAL
FEBRUARY 2008
Figure 7.5.3
Figure 7.5.4
Step 3:
Remove bolts (1) and move the complete spindle out of the tube. Unscrew bolt
(2) and remove the hand wheel. Remove clamping ring (4) and remove sleeve
bearing (6) and shims (5). It’s important that no dust gets into the spindle (7).
Step 4:
Remove grinding disc (1). Unscrew the little bolts (2) inside the dust hood.
Remove dust hood (3).
