Grinding & Polishing
MODEL BGS-250-115-S GRINDER
SECTION 6
OPERATION
35
OPERATING MANUAL
FEBRUARY 2008
The machine must be into its Safety off position before starting repair work. See
Section 2.6.
The local safety regulations are valid in all cases regarding the operation of the
machine and will always supersede any instructions provided in this manual.
6.3 TROUBLE SHUTDOWN
In case of emergency or operating trouble, such as vibrations or
loud noises, switch the machine off immediately by pushing the
red OFF- button
(1) on the power box.
6.4 SAFETY SHUTDOWN
Before performing inspection or maintenance work make sure -
that all moving machine parts are stopped. Observe the Safety
off position, Section 2.6.
6.5 RESTARTING AFTER A FAULT
The results of all electrical repair work must be verified using the
appropriate measurement techniques per the U.S. guidelines, as
appropriate. See also Section 5.2 Initial operation.
