Operating Instructions
BG-250-230/60
Operation October
2005
The normal start up of the Blastrac BG-250-230/60 in the daily operation does
not differ from the described process in chapter 5.2 "Initial operation".
Fig. 6.1 (Electric BG 250 shown)
After connecting the suction tube to the air intake (2) of the machine, you can
treat the surface as described in the following.
If you have doubts about how to start up the machine, read
sections chapter 5.1 and 5.2 of these operating instructions.
Never start the machine if you are not completely confident on how
to operate the machine.
You should grind in fan-shaped movements. Sweep the machine at the
handgrips (1) and push forward during the sweeping movements or pull the
machine in reverse with the same sweeping motion.
The working direction should always be away from the dust collector, to limit
possible damage to the dust hose.
Make sure that no vehicles, such as forklift trucks and other equipment run over
the electric cable and the dust hose.
© Copyright Blastrac
Revision (A) 10-20-05
35
