Operating Instructions
BG-250-230/60
Initial Operation
October 2005
5.1 Preparation for initial operation
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual.
;
Put the grinding machine and the dust collector on the surface to be
treated.
;
In the case you have not yet installed any diamond grinding disc, you
have to install it now. Please
read chapter 7 "Maintenance
” of this
manual.
;
Check the dust hose for damages
;
Connect the grinding machine and the dust collector with the dust
hose. Use hose clamps at the connections.
;
Make
sure
the dust bin of the dust collector is empty.
Any machine, if not used according to regulations, may be
hazardous for operating, setting up and servicing. The
operator/owner is responsible for compliance with the safety
regulations during operation and maintenance of safety devices
supplied with the machine as well as the provision of appropriate
additional safety devises.
© Copyright Blastrac
Revision (A) 10-20-05
28
