27
9. Technical data
2-30DS Global
Power consumption blast motor
30KW
Electrical connection
(voltage is given on the control box)
400V / 50Hz
400V / 60Hz
Blast width
800 mm
Drive speed
0 – 33 m/min
Length
1850 mm
Width
980 mm
Height
1150 mm
Weight
750 kg
Noise level (under load)
83dBa
Vibration level
1.9 RMS
Allows 13,9 hrs. of working with the
mentioned equipment without having to use
anti vibration precaution measures.
Dust hose connection
Ø150 mm
The electrical diagrams of the electrical system are placed inside of the control panel.
Design and specifications are subject to change without notice by Blastrac BV
IMPORTANT NOTES:
The indicated values are measured on new machines. Noise and vibration levels will vary in different
circumstances. Area influences like open outside or closed inside space, ambient temperature, different
surfaces to be treated, daily use, different tools or accessories, poor maintenance, etc. will give different
values at all time and could increase the exposure level over the total working period.
The declared vibration and noise emission levels represent the main applications of the machine. The values
may be measurements from a representative sample of technically comparable machinery. The values may be
used for a preliminary assessment of exposure.
A precise estimation of the level of exposure to vibration and noise should also take in account the times when
the machine is switched off or even running, but not actually in use. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to protect the operators from the effects of vibration and noise such as:
proper and regular maintenance of the machine and the accessories, keeping the hands warm, provision of
proper ear protection and organization of work patterns for example by using rotation schedules. The use of
anti-vibration gloves could also decrease the effects of the vibrations transmitted.
Always wear hearing protection when working with this machine.
Employees surrounding the machine should always use hearing protection.
