19
6.1
Changing the liners
Unscrew the housing front covers (5
+ 6) and remove them.
Loosen the press bolts (7) of the top
liners and take the top liners (20)
out.
Loosen the nuts of the side liners
(23 + 24 + 25) and plenum liners
(26 + 27). Take them out of the
housing.
To mount the liners, keep on the following
sequence:
First place the plenum liners (26 +
27) and fix them with the nuts.
Place the side liners (23 + 24 + 25)
inside the housing. The sideliners
may stick out the body for max.
1mm. Tighten the nuts.
Place the centre liner bottom part
(22).
Place the top liners (20) in the
housing and make sure that the top
liner sits close to the edges of the
side liners and center liner.
Place the center liner top part (21).
Place the housing front covers
(5+6) and tighten the nuts.
Tighten the pressure bolts of the top
liner slightly and press the top liner
against the side liners.
