18
Due to different working conditions it can’t be foreseen how frequently inspections for wear check’s,
inspection, maintenance and repair works ought to be carried out. Prepare a suitable inspection schedule
considering your own working conditions and experience.
We recommend to execute the first repair works on the machine having support of
Blastrac
personnel. With
this your maintenance personnel gets the opportunity to be trained intensely.
Screws, bolts etc. that have been removed must be replaced with those of the same quality, strength, material
and design.
Pay attention to unusual noises or strong vibrations. Check for the cause of every big change. Call a technician
if you have doubts about the cause or when a repair without a technician seems not possible without damages.
Only use genuine Blastrac spare parts.
Our specialists will be happy to assist you with more advice.
Prior to any repair works on the machine and all its drives, secure the machine against
unintentional switching on. Put the machine to its safety off position.
Follow additional operating and maintenance instructions of Original Equipment Manufacturers
during your service and maintenance work.
Further is advised:
Clean the machine every day with air and non-aggressive materials. Never use a high pressure water cleaner
to clean the machine. Protect the electrical parts and motors from moisture, heat, dust and shocks.
Store the cleaned and dry machine in a dry and humid free room. Remove the abrasive out of the abrasive
storage hopper.
Do not weld, flame cut or perform grinding works on or near the machine. Danger of fire or explosion exists!
Provide adequate ventilation when working in a confided space.
Secure the maintenance area if necessary.
Always use original Blastrac spare parts, wear parts and consumables, this will ensure the best performance.
Only original parts meet the factory specifications and quality. Otherwise Blastrac BV cannot guarantee the
safety of the machine. The part numbers can be found in the Service Manual.
All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Any guarantee on the machine is expired when:
Non original Blastrac parts have been used
Repair work is not done by qualified Blastrac personnel
Changes, add on’s or conversions are undertaken without written permission of Blastrac BV.
