Operating Instructions
1-9DEZ
Wear Parts
August 2005
8.1 Wear Parts
Certain portions of the blast unit are continuously exposed to high velocity abrasive.
These areas and their corresponding parts must be periodically inspected for wear and
erosion to keep from damaging components that are not normally exposed to the
abrasive blast. The parts are identified on the service drawings later in this manual
along with part numbers. These “wear parts” are designed to be easily replaced by the
machine operator when necessary. A preventive maintenance program should be
performed to monitor these areas on a regular basis. The following list outlines these
areas and the time intervals involved. See figure 8.1.1 on page 30.
30
Summary of Contents for 1-9 DEZ
Page 1: ...MODEL 1 9 DEZ 8 17 05...
Page 4: ...i...
