Blastrac 1-16DB4-V2, Service Manual, Page: 7 / 62

Mechanical servicing work:
Put the machine in the Safety Off Position as described on page 8 before carrying out
any service work on the machine.
Follow any special safety instructions in sections on servicing the machine. See
Section 5.
Service and maintenance intervals specified in these Operating Instructions, as well
as information on the replacement of parts must be followed.
These activities may only be undertaken by qualified personnel.
The operator must be given information about maintenance and work procedures
before starting the cleaning process. This includes, but is not limited to the following:
• Procedures that are related to normal operation
• Methods of tool adjustments on the machine, and its safety devices
• All “ON and OFF” functions that have to be carried out according to the
operation manual
• Methods for maintenance and repair.
If the equipment is switched off in order to carry out maintenance, repair, or
adjustment, it must be secured against unintended restart.
See page 8 for specific details of the Safety Off Position.
Always dispose of the contents of the dust bags or of a connected dust collector
before loading the machine onto a vehicle.
Observe the local waste disposal regulations; in uncertain situations ask the next
higher authority.
Do not use any aggressive cleaning materials.
Only use lint-free cleaning cloths.
Always verify that any bolted connections that were loosened during service and
maintenance work are properly secure and tight.
Always verify that all belts are in good condition.
If safety devices need to be removed or dismantled during service and repair, these
safety devices must be reinstalled, and inspected immediately after completion of the
servicing and repair work.
Make sure that process materials and replaced parts are disposed of safely and in an
environmentally friendly manner.
Make sure that all components used for replacement purposes comply with the
original parts and are correctly adjusted if necessary.
7