Blastrac 1-16DB4-V2, Service Manual, Page: 24 / 62

1. Remove Item #1, Pinch Bar Outside Liner.
2. Remove Item #2, Pinch Bar Inspection Plate.
3. Rotate the blast wheel to bring Item #3, Blast Wheel Blade, that is to be
removed into reach.
4. Remove Item #4, Bolt and Blade keeper, at the end of the blade.
5. Blow dust and shot out of the threaded hole in the end of the blade.
6. Use a slide hammer to pull the blade out of the blast head.
Important Note: A slide hammer is provided with all machines containing a pinch bar.
7. Clean dust and shot out of the slot for the blast head for proper installation of
the blades.
8. Insert the new Blades and replace Item #4.
9. Inspect the gap between the blade and pinch bar. Adjust if necessary.
10. Reinstall Item #2.
11. Reinstall Item #1.
24