Blanco SERVISTAR GASTRO 120, Operating Instructions Manual

Page: 8 / 32

SERVISTAR GASTRO
– 4 –
Load-bearing capacity
The unit is not designed as a support or transport trolley for heavy objects.
The load bearing capacity specified in the technical data of the plate holders
and the table platform (accessories) may not be exceeded.
The frame construction of the hygiene shrouding may not be used as a
support!
Damage
The unit is only to be used when it is in proper working order.
If damage is present, secure the unit against accidental use and
have repairs carried out immediately at one of the following locations:

In-house, BLANCO-trained professional

External, BLANCO-trained customer service

BLANCO Service
Loading
To prevent extension of the centre of gravity to the unit top, load unit from the
bottom up when loading partially.
Castor brake
Always secure the unit from rolling away by setting the castor brakes. The unit
can cause injury and property damage if allowed to roll away accidentally.
Change of location
Unit model with table platform
Remove any objects from a table platform, if present, before changing its
location. Objects can slide off the unit top when pushing the unit.
The unit is to be pushed only, never pulled.
Push the unit by the supporting frame or the push handle. Do not push the
unit by the plate holders.
When moving the unit, ensure that persons or objects located in the way of
the unit are not overlooked. If the person pushing the banquet trolley cannot
see over it, a second person must walk in front of the unit when it is being
pushed to allow the unit to be moved safely.
Always push the unit using both hands. Depending on the weight of the unit,
if you push it with just one hand it is possible you would not be able to apply
the brakes quickly enough.
To minimise the danger of damage to the castors, avoid overloading the
castors:

Do not move the unit when the castor brakes are locked

Avoid impacts

Move the unit carefully (without momentum) over thresholds or steps.
If the unit is on a slanted surface, it must be secured against rolling away with
further measures (e.g. wedges) in addition to locking the castor brakes.
The unit can be tilted to an angle of 10° when stationary before there is any
danger of it toppling. Only slanted surfaces with an incline of <10° may be
traversed.
When being pushed over a slanted surface, the unit can swerve sideways.
Two people (one at each side of the unit) are required to move the unit over
ramps or recesses.