manualshive.com logo in svg

Blanco SERVISTAR GASTRO 120, Operating Instructions Manual

Share
Download
Blanco SERVISTAR GASTRO 120 Operating Instructions Manual Download Page 13

 

SERVISTAR GASTRO

 – 9 – 

Installing accessories 

Installing accessories

"Push handle" accessory

The push handle is pushed over the supporting frame and fastened with 
a screw. The height of the push handle can be steplessly adjusted.

Push the holder of the push handle over the vertical tube of the 
supporting frame.

Clamp the push handle in place in the desired position together with the 
included assembly materials.

"Hygiene shrouding" accessory

I

The hygiene shrouding consists of a supporting plate and synthetic 
sheeting. The synthetic sheeting consists of a top section, two side 
sections with slits for the push handle (optional) and an unslit front and 
rear section.

 The table platform and hygiene shrouding cannot be used 
simultaneously.

If hygiene shrouding was ordered with the SERVISTAR, the supporting 
plate is delivered installed and the synthetic sheeting is included. 

Ensure that the adjusting screws on the bottom of the supporting plate 
are open.

Place supporting plate on supporting frame.

Tighten adjusting screws.

1.

2.

3.

Summary of Contents for SERVISTAR GASTRO 120

































Reviews:

No comments

Brands by name

Popular brands

Load more brands