Blanco SERVISTAR GASTRO 120 Operating Instructions Manual Download Page 2

SERVISTAR GASTRO

 

General information

Copyright

These instructions are protected by copyright. None of this information may 
be reproduced, distributed, used to the advantage of our competitors or 
made accessible to third parties either completely or in part.

Technical changes

Subject to modifications for the purpose of technical improvement.

Product documentation

Original operating instructions; Target group: operating personnel, kitchen 
directors.

Typographical conventions

Important 

note

 on special features or special cases.

I

Explanatory information

 in chapters or sections containing instructions.

Cross reference

 to a chapter, section or external document.

Condition

 which must be fulfilled before the subsequent steps can be 

carried out.

Action

 or activity which must be carried out.

Unit model XYZ

A section identified in this way applies only to a particular 

unit model

 or unit 

option.

Warnings

Signal word!

Type and source of danger

Possible consequences of non-compliance with the warnings. 

Measure to avoid dangers and the consequences thereof.

The signal word (caution, warning, danger) informs of the level of danger.

Caution

 warns of possible minor bodily injuries and property damage.

Warning

 warns of possible serious bodily injuries.

Danger

 warns of possible extremely severe/fatal bodily injuries.

Summary of Contents for SERVISTAR GASTRO 120

































Reviews: