Blanco BFS95F, Instructions For The Use And Care And Installation, Page: 19 / 31

Instructions for Use
(oven side)
ELECTRONIC PROGRAMMER
Setting up the actual hour
Once the electronic connection is com-
plete and power is applied, the display
blinks and shows 0.00.
Press keys (1) and (2) at the same time,
then press keys (-) and (+) to set up the
actual hour within 4 seconds; the oven
remains in manual operation and no
programming is necessary.
General remarks:
• Between 10.00 p.m. and 6.00 a.m. the
display intensity dimmers automatically.
• If not deactivated as per the following instructions, the acoustic signal is cut off after 2
minutes.
• Any programming described hereunder is activated after approx. 4 seconds from its set-
ting up.
• 23 hours and 59 minutes is the maximum time allowed for programming the oven.
• When the voltage lacks, all the programmed settings are erased. When the voltage
returns, the display blinks and shows 0.00. Set up the actual hour and the programme
again to reset the equipment operation.
Acoustic minute-counter
To use it as a simple acoustic signal, press key (1), and programme the required
time by pressing keys (-) and (+) within 4 seconds. The actual hour appears, and
symbol (B) is activated. Press any one of the keys from (1) to (4) to deactivate the
acoustic signal. Also symbol (B) is deactivated.
Setting up the end of cooking
To start the cooking immediately and to automatically set up the time, proceed as
follows:
• Select the function and the temperature required by the function selector and the
thermostat
• Press key (2), and set the cooking time using keys (-) and (+) within 4 seconds.
19