background image

5

USE

FIG. 3

FIG. 4

FIG. 5

(*) Air inlet - minimum section 100 cm

2

To use the WOK pan support on Wok gas

burner only.

Put it on the WOK pan support and make

sure of the stability (see fig. A).

Abnormal Operation:

any of the following are considered to be abnormal 

operation and may require servicing:

- yellow tipping of the hob burner flame.

- Sooting up of cooking utensils.

- Burners not igniting properly.

- Burners failing to remain alight.

- Burners extinguished by cupboard doors.

- Gas valves which are difficult to turn.

WARNINGS AND ADVICE FOR THE USER:

- use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The

room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating

the mechanical aeration device (suction hood or electric fan fig. 4 and fig. 5).

- Intensive and lengthy use of the appliance may require additional ventilation. This can be achieved

by opening a window or by increasing the power of the mechanical exhausting system if installed.

- Do not attempt to change the technical characteristics of the product because it can be dangerous.

- If you should not to use this appliance any more (or replace an old model), before disposing of it,

make it inoperative in conformity with current law on the protection of health and the prevention of

environmental pollution by making its dangerous parts harmless, especially for children who might

play on an abandoned appliance.

- Do not touch the appliance with wet or damp hands or feet.

- Do not use the appliance barefoot.

- The manufacturer will not be liable for any damage resulting from improper, incorrect or

unreasonable use.

- During, and immediately after operation, some parts of the hotplate are very hot: avoid touching

them.

- After using the cook top, make sure that the knob is in the closed position and close the main tap of

the gas supply.

- If the gas taps are not operating correctly, call the Service Department.

Warning: during operation the work

surfaces of the cooking area become

very hot: keep children away!

Fig. A

Summary of Contents for BCG603WXFFC

















Reviews: