USA
page 27
USER SECTION
5. CONTROL PANEL AND RELATIVE SYMBOLS
6. OPERATION
• Insert the overflow pipe in the special seat inside the tank.
Make sure all the filters are properly fitted in their seats. The filters must be cleaned every 40-50 wash cycles and whenever
necessary.
Do not operate the machine without filters, and in particular the pump suction filters.
• Open the water valve.
• Turn on the main wall switch and put the selector on
(it is not a total disconnecting switch).
• Insert the special green rinse aid dispenser tube in the liquid rinse aid container and check that the quantity is sufficient
for the daily requirement.
• Make sure that the selector is on
.
• Using the handle, lower the machine hood and the tank filling phase automatically starts. The automatic electric detergent
dispenser supplies to the dosage of the detergent.
• After filling, the machine automatically starts the heating phase.
• The machine will be ready for washing only when the boiler thermometer
4
and tank thermometer
5
indicate that the
required temperatures have been reached, which are 185°F (80-85°C) for boiler and 160°F (71°C) for the tank.
• Select the wash time with the selector
3
.
Pos. 1= short
Pos. 2= long (NSF)
This in machines equipped with thermostop, in order to guarantee the exact rinse temperature, the washing time can
increase to allow the boiler water temperature to reach the set temperature (185°F / 80°-85°C)
• Insert the basket with dishes or various articles to be washed and close the hood (see par.
6.1
). The wash cycle starts
automatically, immediately followed by the rinse cycle. The cycle is signalled by the indicator
2.
• The cycle is finished when the indicator goes off.
• The appliance is ready for another cycle.
Note:
It is advisable to change the tank water, by means of another filling, at least every 40-50 washes or twice a day.
Clean the machine at the end of the day (see chap.
7 Maintenance
).
Position the selector
3
on the position
0
.
Switch the machine off and close the water valve.
N.B.:
the first cycle carried out after changing the time with the mechanical timer will not yet be like the one set previously:
the timer requires a complete washing cycle in order to realign the cams accordign to the set time. Selecting
the cycle
won’t start by closing the hood.
6.1 Cutlery and crockery loading
Before cutlery and crockery loading in the machine, coarsely clean them from the leftover food.
It isn't necessary to rinse the cutlery an crockery under water.
ATTENTION: Do not wash articles polluted with petrol, paint, chips of steel or iron, ash, sand, wax, lubricant grease.
These substances damage the machine. Do not wash fragile objects or material not resistant to the washing process.
CONTROLS
INDICATORS
Cycle indicator
Cycle time selector
0= off
= loading only
1= 120s
2= 180s (NSF)
Boiler thermometer
Tank thermometer
Manual-automatic
draining button
(optional)
Summary of Contents for D-18
Page 2: ......
