Blagdon Inpond 5 in 1 2000 Manual Download Page 22

20

TROUBLESHOOTING & IMPORTANT

UVC light not illuminated

• 

Check all fuses / RCD and electrical connections follow electrical installation  

Faults - Problem Procedure

Before returning your Inpond to your dealer or contacting our Consumer Advice 
Department, please carry out the following steps. This will solve most problems quickly 
and easily.
1.  Ensure electrical procedures have been followed fully. Check fuses and any cable 
 

connectors/switch boxes.

2.  (a) Follow routine maintenance procedure fully. (b) Check location and connecting your  
 

pump details including flow rates. (c) Ensure that your pond volume and pump flow rate 

  

meet the maximum pond size recommended for the filter model on the filter  

 

performance and specification chart. (d) Follow troubleshooting guide.

3.  If there is a mechanical breakdown of the filter or UVC, return to the point of purchase  
 

for inspection and advice (You will need proof of purchase).

Guarantee

UV & FILTER 

This product is guaranteed against defects in material and workmanship for 3 years from the 
date of purchase, under normal usage. The guarantee DOES NOT APPLY in case of improper 
use, negligence, lack of maintenance or accidental damage to either the filter or UVC. If the 
filter or UVC fails due to a manufacturing fault within this period it will be either repaired or 
replaced free of charge. Liability is limited to replacement of the faulty product only; no other 
costs will be reimbursed. The guarantee is not transferable and does not affect your statutory 
rights. This guarantee does not confer any rights other than those expressly set out above. This 
guarantee does not cover the filter foams or UVC bulb, which will need replacing when worn 
or every 6 months. If any parts are needed, spares are available from your retailer.  

Summary of Contents for Inpond 5 in 1 2000

























Reviews: