MAINTENANCE & CLEANING
Annual maintenance of the filter
Check for wear.
Once a year you should dismantle your Inpond. Dismantle the filter examin-
ing all the parts for wear or damage, replacing any parts showing obvious signs of wear
and/or damage (see getting to know your filter for replacement codes and parts descrip-
tions on pages 3 and 4)
Annual maintenance of the pump
Check for wear.
Once a year you should service your pump. Dismantle pump and examine
all parts for wear or damage, replacing any parts that show obvious wear and/or damage
(see getting to know your Inpond for parts/description and replacement codes). Particular
care should be taken to examine the cable entry points.
Annual maintenance of the UVC
Check for wear.
Once a year you should dismantle your Inpond UVC - see page 8. Ensure
you have disconnected the mains supply before carrying out any maintenance or cleaning.
Dismantle the UVC examine all the parts for wear and damage, replacing any parts that
show obvious signs of wear and damage (see getting to know your Inpond for parts/
description and replacement codes). The UVC lamps require replacing annually, ideally in
the spring.
Winter Storage
The Inpond can be run in the pond during the winter but care should be taken to ensure that
it is fully immersed and cannot freeze solid. If the Inpond is not used during the winter follow
the annual maintenance procedure and store frost-free in the house or garage until spring.
17
